Consistency is the key to having the best results. If you want to make a tender brisket, your cooking temperature should be close to 250 F during the entire 12-hour cooking period. The control board is responsible for precision. There are three types of controllers – PID multi-position, non-PID one-touch, and 3-position. Check out the different types of controllers for the one that is right for you.
Even if you’ve got a meat thermometer at home, it’s not a bad idea to pick up a smoker with one built in. This is because the built in thermometers send their readings straight to the smokers computer and it automatically adjusts how it’s cooking based not just on how hot it is inside, but how this affects what you’re cooking. Now, unless you’re Gordon Ramsey you probably can’t tell what’s going on inside that turkey you’re cooking, so this is obviously a major plus.
What’s also really great is that the price isn’t too bad and that most people will be able to afford this product. If you’re not convinced yet you should check out the reviews on Amazon. There’s hundreds of them and most are overwhelmingly positive. If you want to see what other customers are saying about the GMG Davey Crockett Pellet Grill, click below:
PID: For the most precise temperature control, some pitmasters feel that a grill with a proportional-integrative-derivative (PID) controller is the way to go. A PID controller uses algorithms to keep the temperature within a couple of degrees of the setting. It doesn’t use fixed cycles to release the pellets. Instead, the controller only adds pellets when it’s necessary to maintain the desired temperature.
This is a great smoker for beginners who are willing to take the time to understand how pellet smokers work. You can follow the instructions in the video provided on the manufacturer’s website to see how to put it together. It is also great for people who have been pellet smoking for years. It has a huge cooking surface, which is perfect for entertaining large groups of friends.
Hey David – in my opinion, you’re going to find hot spots in any entry level pellet grill/ pellet smoker. I include GMG, Rec-Tec, Traeger, etc. When you start moving into the higher pellet smokers/grills – Memphis Grill, MAK, etc, you can minimize these to some extent. If you experience higher heat on one side, put the thicker cut of meat (pork butt, point of brisket) near that part.
Have you reviewed at all the Grilla Silverbac? If so, does it not make your list because it isn’t as good a quality as those you have picked? I mean, when I look online for reviews of those who have bought them I haven’t found anyone disappointed with theirs, but perhaps they haven’t been out as long to have a track record? I’m so confused at this point as to which to buy with PID or no PID (some say smoke does better without one), thickness of metal, etc.
Got the Traeger Pro grill. I was so excited after seeing all of the commercials, unfortunately once I got it together it did not work. No heat on the glow rod no fan nothing. The only thing that worked was the auger and the front panel lights up. Called customer service spent 2 hours on the phone for them to tell me what I already knew they did not work. I told the man on the other end of the line that if it could not work out of the box I did not want it, he stated no returns. Now I am stuck with it. He says, "I will send you the parts needed you can replace them."
To be sure, there are pure “smoker” and pure “grills” but there are some exceptionally well-designed hybrids. I bought a Memphis Elite last year, and it is AWESOME! I made a pulled-pork masterpiece two months ago that was absolutely delicious… 8 hours on low temperature (225) then an hour on open flame (switching from a “smoker” insert to an “open-flame’ insert at 700 was easy) and it was awesome!
Despite being a little complicated when compared to the other types of grilling equipment (because of the automatic pellet auger and fan), they are pretty easy to repair if you have the right parts. You can find these parts right at a home depot or online. It doesn’t matter if you need to replace the auger or the fan, the ignitor rod or the hopper, for the top brands, you’ll find the replacement parts just as easily. Let’s look at the replaceable parts of a pellet smoker:
The first name to kick start our list of the best pellet grill review is the Camp Chef PG24 Pellet grill. It measures 45 inches by 21 inches by 51 inches, in dimensions. This pellet grill weighs 127 pounds and capacitates a 550 cubic inch cooking surface. It has a removable upper rack, and it comes with a stainless steel food probe. Camp Chef PG24 Pellet grill comes with an LED digital temperature control system, and has a patented down cleaning system. It can provide temperatures from 160 degrees to 500 degree Fahrenheit, and has an internal sensor.
According to Bruce Bjorkman of MAK, his cookers use about 1/2 pound of pellets per hour when set on "Smoke" (about 175°F). At 450°F, the high temp, they burn about 2.3 pounds per hour. This is about the same average as I have experienced on a variety of pellet eaters. The burn rate will vary somewhat depending on the outside air temp, and how much cold meat is loaded in the grill, but cooking load should not have a major impact. Cooking pellets run about $1 per pound depending on the wood flavor, brand, if you get them on sale, and if you have to pay shipping. As a point of comparison, Kingsford briquets list for about $0.75 per pound, but they don't pack the same BTUs because there are fillers. I usually buy 40 pound bags of BBQr's Delight pellets from BigPoppaSmokers.com for $45 and shipping is free to IL. That's $1.13 per pound. That means that if I cook a slab of spareribs for six hours at 225°F I will probably burn about 4 pounds at about $4.50. If I put 8 slabs in there in rib holders, and allocate 1/2 slab per person, my cost for 16 people is about $0.28 each. If I grill a mess of chicken parts at about 325°F for about 1 hour, I will use about 1.5 pounds of pellets for a cost of $1.70.
Thank you so much for this very informative post!! My husband and I just bought the Traeger Select Elite Pellet Grill On Cart yesterday as a somewhat impulsive buy on a Costco shopping trip. It was the last day in the road show so I figured we could always return it if we have buyer’s remorse. Having no past experience with pellet smokers/grills, I am doing my due diligence in researching the reputation of this company and comparing to others in the market. The selling point for us with this particular Traeger grill was the ability to convert this to a built in unit by simply taking off the right side shelf. The sales rep at Costco had a picture of one that his parents had built into an attractive brick surround and we liked the option, however, after reading your post and several other sites, I am finding that Traeger may not be the best investment comparatively and with a purchase this expensive, long-term quality is extremely important to us. In staying within the same price range, I am very interested in the Rec-Tec and it’s stainless steel build. My question is, do you know if the Rec-Tec or another pellet grill @ the $1000 price point can be made to look “built-in” and if so, are there any dangers or potential problems with this.
Just what I needed for my Traeger Pro 22. Fits like a glove, simple install, and makes adding and pulling rib racks off the smoker much easier. No longer a balancing act trying to get a tray to stay put on top of the pellet hopper lid. This also fits perfectly under Traeger's cover for the Pro 22 models. Have to be a little care you dont pinch your fingers when folding it down (would be a nice future mod if it could somehow be spring assisted), but thats my only gripe.