Hey Brad, you’ve got 3 great grills there. Rec Tec has the edge on Pellet quantity. I like the build quality and support on the Grilla a bit better, especially with the extra insulation and updated comp wheel set up. Figure 10 min or so to get to top temps. Just remember to drop to around 300 F temp setting before going into the shut down cycle on any pellet grill if you’re cranking it up to the highest setting.
First impression was this thing isn't built like a mass produced unit, it's more like something you would expect from a master fabricator. The assembly instructions were incredibly detailed, and the way it was packaged made it really easy. It takes a little time to get temp steady for low smoking, but once it's there it seems to be pretty steady. So far absolutely impressed with everything about this cooker, and made in the USA!!!
The biggest cleanup issue is the buildup on the heat deflector under the cooking grates. You'll need good gloves and an apron. On most models, a thorough cleanup means a 30 minute process of taking out the greasy grates and the gooey deflector plate, scraping them and washing them. You should do this when the carbon and grease cover the deflector plate. Stainless parts can go in the diswasher, but I wouldn't do it. That grease is like tar and it could get all over the insides of the dishwasher and hang on for dear life. I use a handheld steamer like the Steamfast SF-320 Portable Steam Cleaner shown here.
If you live in an area where wood furnaces are used (not like down here in FL where a few heat strips will do the trick), you may also be familiar with pellet furnaces. In short, pellets compressed from sawdust and wood shavings fill a hopper and are then fed into a burn pot using an electric auger system. The auger, which is basically a long screw, delivers pellets to the burn pot based on the speed dictated by the unit’s thermostat. As the burn pot ignites, the pellets burn. Heat then carries through the home via convection (air driven) means, thus allowing air flow and a blend of warm and cool air to maintain steady, even burn temperatures. A heat exchanger separates the smoke fumes from the warm air, thereby warming the room without smoking everyone out.
Sometimes, the ideal pellet is something that costs a little over $1 for quality but you can still save money by buying them in bulk (like in 40 pound bags). Half a pound of pellets per hour is consumed on the smoke setting that’s about 175° Fahrenheit. Meanwhile, you can burn 2.3 pounds of pellet within an hour by setting the temperature at 450° Fahrenheit (this is an average on many of the pellet smokers mentioned above).
You are worried about flare-ups: When grilling fatty types of meat on a propane grill, you run the risk of having flare-ups, where the flame gets too high and too hot, burning the meat. You have to keep a close eye on the propane grill to guard against them. But with the Traeger grilling system, the even distribution of the heat and the indirect heating system prevent this problem.

Up next to find its place in our pellet grill review is the REC TEC’s mini portable pellet grill. It has a 341 square inch cooking surface with 180 degrees to 550 degrees Fahrenheit temperature limit, with 5 degrees increment. But it can easily reach 600 degrees Fahrenheit in full mode. It has a satisfactory pellet hopper capacity and has folding legs. It is great for travel and movement as it is compact and small in size.
×